How To Adjust Camber On Chevy Truck?

Camber angle is the angle between the vertical axis of the wheel and the vertical axis of the vehicle which is checked from the front and rear of the vehicle. Adjusting the camber angle of a Chevy truck is a very important task. 

Regular camber adjustment is required to keep the truck wheels in a straight line. The degree to which the wheels of any vehicle are tilted outwards or inwards is determined by the camber. 

If the wheels tilt more or less at a certain angle, it can have a significant impact on the life of the wheel and driving. That is why we will discuss this important topic in this article. You are about to learn how to adjust the camber on a Chevy truck in just a few simple steps.

What are the categories of Camber Angle?

The camber angle, as we know, is very important for the healthy life of your Chevy truck. You can specify the camber angle of your truck depending on what kind of driver you are or your driving style. Do you know what kind of camber angle? It is of three types-

  1. Positive camber;
  2. Negative camber and
  3. Neutral camber.

Let’s take a brief look at these three types of camber angles.

Positive Camber:

In this type of camber angle, the wheels of the truck lean towards the vertical axis. The bottom portion of the wheel that touches the ground is bent towards the inside of the truck structure.

Negative camber:

This is the complete opposite of positive camber. This means that the portion of the wheel that touches the ground extends beyond the body of the truck.

Neutral camber

In this case, the wheels of the truck are straight along the vertical axis. As a result, the wheels do not extend beyond the body of the truck, nor do they fold inside.

What Is the Best Camber Angle on Chevy Trucks?

Let’s first imagine a situation. When the wheel of a car moves to zero degrees on the ground, most of the tires are in contact with the ground. This means more traction, and more tire wear. 

When the car takes a turn, its centrifugal force causes more pressure on the outside of the tire and less pressure on the inside. Therefore, we understand that the counterweights of all vehicles are not always balanced. 

However, which camber angle will suit you relies on your demands and driving. If you want to use your Chevy truck for agricultural purposes, then a positive camber is best for you. 

On the contrary, if you want to drive a truck on a winding road where there is a lot of pressure on the tires, you pick a negative camber. So, the choice is yours.

Cost of Adjust Camber on a Chevy Truck

If you want to get it done on your own, you don’t need to spend anything other than equipment. On the other hand, if you go to a mechanic’s shop, they will charge $30- $50 for each wheel. Thus, the total cost for the entire truck can be $120- $200. 

Requirements to Adjust Camber on a Chevy Truck

With just a few tools, you can accomplish this task and they are:

  1. One or two jacks for lifting the truck;
  2. A wrench and a socket;
  3. A camber gauge;
  4. A caliper.

How to Adjust Camber on a Chevy Truck?

So let’s get started on the basics of adjusting the camber on a Chevy truck in just a few simple steps.

Stage 1: Calculate the Camber

First, you need to measure the current camber angle of your truck. Before you start measuring, check that the wheels are straight along the front. Measurements can be wrong if the wheels are not straight. 

You can take the help of a camber gauge to make your work easier. The gauge should be adjusted properly. This will ensure that the central component of the caliper is compatible with that of the hub.

Stage 2: Disassemble the Front Tires

Once measured you will need to remove the front wheel of the truck. To do this, raise the front of the truck utilizing a jack. Then disconnect the wheels.

You can adjust the camber of both the front and rear wheels of the truck if you want, but just dealing with the front ones will suffice.

Stage 3: Mark the Arm Ascending Bolts

Where would you go to find arm ascending bolts? Notice the arm mounting bolts on either side of the frame that secure the control arm to the top of the chassis. 

Now you need to align the cam. For this, check the outside of the frame. There the alignment bolt is visible as an expansion of the structure. This will allow you to understand the cam system of your truck.

Stage 4: Reduce the Upper Control Arm

You will have completed 80% of the total work by completing this step. So now you should loosen the upper arm of the truck using the wrench and socket. This time keep your eye sharp and hold an eye on the wheel alignment pins. 

Notice when the pin arrives at the exact degree. Fasten the upper control arm just when the pin reaches the corner of your choice. OK, this is done to rectify the camber on your Chevy truck. Welcome!

Stage 5: Examine the Camber Angle

Now carefully remove the jack and slowly lower the truck to the ground. Check that the camber angle is set to suit your needs. If not, repeat the steps above.


So, here is the process of how to adjust the camber angle on a Chevy truck. Believe us, the steps described in this article are the easiest way to adjust the camber angle. 

You can complete the task for free by following the steps above rather than going to a mechanic and spending money. However, take care of your truck and drive safely.

Leave a Comment