How To Reset Traction Control Light Toyota? [4 Methods]

To reset the traction control light on a Toyota, turn the ignition to the “ON” position. Then press and hold the VSC button for about 3-5 seconds, and the TRAC will be turned off. After releasing the VSC button, press it again within a second. You’re done resetting. Resetting the traction control light on a Toyota can be done in a few other ways. You can perform each method effortlessly.

This is only a brief overview. Read on for in-depth information.

How to Reset Traction Control Light Toyota

Likewise, for other brands of cars, Toyota also has a specific method to reset traction control. There are also some universal methods for resetting traction control. The following are the four most reliable methods for resetting Toyota’s traction control. 

Manufacturer Reset Method

To reset the traction control in your Toyota, first, you must locate the traction control button. The traction control button on Toyota vehicles is specifically labeled the “VSC (vehicle control stability) button. (1)

The VSC button typically has a car sign with two wavy lines. 

Model-wise, the location of the traction control button may vary. 

For example, in a Toyota Tacoma, you can find the VSC button behind the gear shift. Also, on a Toyota Corolla, the VSC button is located behind the gear shift as well. 

If you’re in a Toyota Hilux, you’ll find the VSC button on the center console. The Toyota Tundra has the VSC button on the right side of the dashboard, and on the Toyota Camry, the VSC button is located on the left side of the steering wheel on the dash.

To find the VSC button on your specific model, check your owner’s manual. 

Once you’ve located the VSC button, turn the ignition to the “ON” position. Then press and hold it for 3 to 5 seconds. After that, the VSC indicator light should come on in the instrument cluster. 

Immediately after turning off the traction control, press the VSC button once again. With that, the traction control light is reset

OBD Reset Method

The following steps will help you reset the traction control light on any Toyota using an OBD scanner:

  1. First, locate the OBD scanner port in your vehicle. It’s typically under the dashboard on the driver’s side. 
  2. Then, plug the scanner into the vehicle’s computer. When the connection is established, turn the ignition to the “ON” position. 
  3. Press the “Scan” button on the scanner and wait for the report. You will then see an error or trouble message with a specific code indicating a problem. 
  4. Select the traction control light option, clear the code, and reset the light following the instructions on the scanner. 
  5. Finally, disconnect the scanner and start the vehicle to confirm the light is no longer illuminated. If you need further assistance, consult your owner’s manual or a mechanic.”

Please be aware that some scanners may require different menu selections and steps to reset the traction control light, so you may need to refer to the scanner’s user manual. 

Method For Resetting Without OBD

The Toyota traction control light can be reset effortlessly, without the need for any tools, by utilizing a small piece of jumper wire.

In this method, you will need to locate the diagnostic port under the dashboard on the driver’s side in order to reset the traction control light on a Toyota.

Once you’ve found it, you’ll need to connect a jumper wire to pins 4 and 13. The ground pin is pin 4, and the auxiliary pin is pin 13. In case you are unsure, consult your owner’s manual since different models may use these pins differently.

Next, turn the key to “ON” and press the brake pedal eight times within five seconds. This should reset the light. 

Fuse Removal Method

If you’re looking to reset the computer on your Toyota and turn off the traction control light, it’s a quick and easy process. You don’t need any specialized tools for this. The fuse box is typically located under the hood, near the battery, in your vehicle. 

Next, remove the fuses labeled “backup” and “ECU” using the provided fuse puller. Allow these fuses to remain out for 10 minutes before reinserting them. 

Once you’ve done so, reinstall the fuse box cover as it was and start the engine to see if the traction control light has disappeared or not. 

When Do You Need To Reset Traction Control Light on Toyota?

If the traction control light comes on in your Toyota, it is an indication that there may be an issue with the system. In some cases, software bugs or glitches in the system may cause the light to come on. Depending on the situation, resetting the light and the system may solve the issue.

If the light comes on again after resetting, it’s highly recommended to have the vehicle inspected by a professional mechanic to ensure that the problem is not due to a hardware failure or other issues.

Why Is My Toyota Traction Control Light Staying on Even after Resetting?

You must keep in mind that the traction control light may turn on due to several hardware issues including faulty wheel speed sensors, inoperable yaw sensors, faulty steering angle sensors, etc. 

Furthermore, malfunctioning ABS and wiring damage can also cause the traction control light to stay on even after resetting. 

If you have a problem such as this, you can check out the process to fix the traction control system.

FAQs

How Do You Manually Turn Off Traction Control?

To manually turn off the traction control, first turn the ignition on. Then press and hold the VSC OFF button. This will allow you to turn off the traction control system, and a TRAC OFF message will appear in the dashboard.  It should be used with caution due to the possibility of losing stability and less control when certain conditions such as; slippery snowy, icy, and rainy are present.

Is The Traction Control Light Serious?

Yes, the traction control light can indicate a serious issue with the vehicle’s system and should not be ignored. In case, if the traction control light illuminates, you must have it checked by a professional mechanic and make sure there’s no hardware issue. Ignoring the light may put you and your vehicle at risk.

Can Low Oil Cause The Traction Control Light Come On?

No, a low oil level is not a direct cause of the traction control light coming on. Low oil levels, however, can cause damage to the engine and other components, resulting in a dashboard warning light or error message. To prevent engine damage and ensure proper engine operation, keep your vehicle’s oil level at the correct level.

Conclusion

Well, that’s all about how to reset the Toyota traction control light Toyota. Hopefully, now you won’t face any issues when it comes to resetting the traction control light on your Toyota. Remember, traction control lights should never be underestimated as they can cause serious hazards.

Leave a Comment

Written By

Photo of author

William Baldwin

This Is William Baldwin, The Founder & Managing Editor of this website. Me and my team share automotive tips, tricks, and news

Fact Checked And Mechanically Reviewed By

Talha

Talha Atta

Talha Atta, a Mechanical Engineer and experienced technical content writer and editor at Autoglobes.com with a passion for the automotive industry.