19×9.5 Tire Size: A List of Every Possible Size

P 235/35 R19, P 275/30 R19, and P 245/35 R19 are among the compatible tire sizes for 19×9.5” rims. The smallest tire that can be used on these rims is P 235/30 R19, while the widest tire that can fit on them is P 295/35 R19. Nevertheless, for optimal performance, the P 265/35 R19 tire is recommended as the best choice.

Obviously, that’s not the whole story, so let’s dig deeper into the 19×9.5 tire size.

List of Possible Tire Sizes For 19×9.5 Rims

There are a number of tire sizes that are possible to fit on 19×9.5 rims. The 19 in the size specification signifies the diameter of the rim in inches, while 9.5 indicates the width of the rim in inches. 

Tire Sizes

To ensure proper fitment, it is crucial to match the inner diameter of the tire to the diameter of the rim, which in this case is 19 inches. Additionally, the width of the tire should correspond to the width of the rim to guarantee proper alignment and adequate tire support.

As a general rule of thumb, you can fit 11 to 16 % wider tires as compared to the rim. This allowance allows for some degree of flexibility in selecting a tire size, and also accounts for variations in tire manufacturing and wear.

The below table represents the list of all possible tire sizes for 19×9.5 rims. 

Tire sizeOverall wheel diameter in inchesLoad Index RatingSidewall Height (Inches)
P 235/30 R1924.6″842.77
P 245/30 R1924.8″892.90
P 255/30 R1925.0″913
P 265/30 R1925.3″933.15
P 235/35 R1925.5″913.25
P 275/30 R1925.5″963.25
P 245/35 R1925.8″933.40
P 255/35 R1926.0″963.50
P 265/35 R1926.3″983.65
P 235/40 R1926.4″963.70
P 275/35 R1926.6″993.80
P 245/40 R1926.7″983.85
P 285/35 R1926.9″993.95
P 255/40 R1927.0″1004.00
P 295/35 R1927.1″1034.05
P 275/40 R1927.7″1014.35
P 245/45 R1927.7″994.35
P 255/45 R1928.0″1034.50
P 235/50 R1928.3″994.65
P 245/50 R1928.7″1004.85
P 255/50 R1929.0″1055.00
P 285/45 R1929.1″1075.05
P 235/55 R1929.2″1055.10

Here is the explanation of tire size data in the aforementioned table: 

  1. The tire size column labeled “P” indicates that the tire is designed for passenger cars.
  2. The number 235 represents the width of the tire in millimeters.
  3. The number following the slash indicates the percentage of the tire’s sidewall.
  4. To determine one side of the tire’s sidewall measurement, multiply the width by the percentage following the slash (e.g., 235/30).
  5. Multiply the resulting number by 2 to obtain the overall tire’s sidewall width since there are two sidewalls on a tire.
  6. The letter “R” denotes radial construction, one of the two types of tire construction.
  7. The other type, diagonal construction, is indicated by the letter “D” on the sidewall of the tire.
  8. The number 19 at the end of the tire size represents the diameter of the rim.

For example, if you install a P 235/30 R19 tire on a 19-inch wheel, the overall diameter of the wheel will be 24.6 inches. This calculation involves multiplying the overall rim size of 19 inches by 30% of 235 millimeters, which equals 2.77 inches when converted to inches. 

Then, you must multiply this number by 2 to account for both sidewalls, resulting in approximately 5.6 inches. Adding this to the overall rim’s diameter of 19 inches will give you an overall wheel diameter of 24.6 inches.

Moving on to the next row, the load index indicates the maximum weight that the tire can safely support when properly inflated. The speed rating indicates the maximum speed at which the tire can operate safely.

After such a long list and explanation, here’s some bonus information for you. If you drive a Jeep Wrangler, will 33 inch tires fit a 2.5 inch lift on Jeep Wrangler? You can know the answer by giving it a read any time you want.

What Is The Smallest Tire On 19×9.5 Rims?

Based on industry standards, P 235/30 R19 is the smallest and narrowest tire that can fit on 19×9.5 rims. This tire size offers a low-profile design giving a sporty look to the vehicle. 

However, it also comes with some drawbacks, such as reduced ride comfort due to stiffer sidewalls and a higher risk of wheel damage from potholes and bumps in the road. In the table below, we’ll take a closer look at the pros and cons of this setup.

ProsCons
1. Achieve better fuel economy
2. Experience reduced road noise and vibrations
3. Enjoy improved traction on snowy roads
1. The vehicle’s safety at high speeds is compromised.
2. Vehicle handling is not as precise or sharp as it should be
3. Poor braking performance compared to high-profile tires

What Is The Widest Tire On 19×9.5 Rims?

P 295/35 R19 is the widest tire on a 19×9.5 inches rim. However, this is not recommended because using a wider tire than the rim can lead to uneven wear, reduced handling, and decreased safety.

Second, a wider tire may not fit properly on the rim, causing the tire to bulge and potentially leading to a blowout. Finally, using a wider tire than the rim can also affect the accuracy of the speedometer and odometer readings. 

There are some potential benefits and drawbacks of this setup. Have a look at the table below for a quick overview of that.

ProsCons
1. The tire provides exceptional grip on both dry and wet roads
2. It offers enhanced handling and maneuverability, allowing for easy navigation of turns
3. The design of the tire optimizes high-speed durability, providing confidence and peace of mind while driving at high speeds
1. Fuel economy has been negatively impacted, resulting in a decrease in efficiency.
2. The driving experience has been compromised, leading to a reduction in comfort.
3. The cost of tire sets has increased, resulting in higher expenses for vehicle maintenance.

Speaking of the widest tires, do you know what is the widest tire on 8 and 8.5 inch rim? Read about it anytime you need.

What Is The Best Tire On 19×9.5 Rims?

P 265/35 R19 is the best tire for 19×9.5 inches rim. According to the technical calculation, you can install an 11% to 16% wider tire than the rim for optimum performance. In the case of a 19×9.5-inch rim, the width is 9.5 inches, which is equivalent to approximately 242 mm. Adding 11% mm to this value yields 268 mm, and the closest size available is 275. The aspect ratio commonly associated with 275 tires is 30, 35 and 40 %.

This tire size is ideal for attaining an optimal contact patch, which enhances grip and handling while avoiding excessive or inadequate grip. It also does not significantly impact fuel economy while offering superior driving comfort.

FAQs

Can You Put A 275 Tire On A 9.5 Rim?

Yes, a 275 tire can be safely mounted on a 9.5″ rim. Many people have reported success running this combination without any issues, including running wider 285 tires. As long as the tire is properly mounted and inflated, you should be able to enjoy a comfortable and stable ride. 

How Tall Is A 9.5 X16 Tire?

A 9.5 X16 Tire is 16 inches tall where the first number (9.5) indicates the width of the tire and the second number (16) refers to the diameter of the tire. It’s important to note that the diameter of the tire is equivalent to its height after being placed on a surface.

Is It Ok To Have 2 Different Size Tires?

Having two different-sized tires on the same axle is generally not recommended as it can lead to issues with your car’s differential. While a small difference in diameter may not cause immediate damage, it can affect the long-term performance of your vehicle. So, it’s best to consult with a professional mechanic and replace any damaged tires with ones that match in size and specifications.

Conclusion

Well, this was a comprehensive list of 19×9.5 tire sizes with specifications and pros and cons of each size. It is essential to match the tire size with the rim’s diameter and width to ensure proper fitment and alignment. Mismatched tire size can cause multiple issues and that can hamper your driving. Hence, be careful about that.

Leave a Comment

Written By

Photo of author

William Baldwin

This Is William Baldwin, The Founder & Managing Editor of this website. Me and my team share automotive tips, tricks, and news

Fact Checked And Mechanically Reviewed By

Talha

Talha Atta

Talha Atta, a Mechanical Engineer and experienced technical content writer and editor at Autoglobes.com with a passion for the automotive industry.