Loctite 271 vs 272: Which Is The Best Lube?

The threadlocker is an optimal solution for securing bolted joints. Bolted or removable joints are a universally used fastening system for industrial assemblies, but they’re especially important in automotive manufacturing because of the sheer number and variety of bolts that need to be tightened down on cars at assembly plants. Without these threads locked tight, car factories would descend into chaos as parts start coming loose during production runs.

Bolted joints are present in countless objects, machines, and vehicles. A bolted joint can be seen as a disadvantage because it fails over time from stress or vibrations when subjected to impacts, loads on the fastener itself due to thermal expansion causing loosening of the clamping force around that object. To avoid this serious drawback one must use LOCTITE 271 which is an adhesive sealant for the assembly so there will not be any failures caused by high-stress situations during operation while at work or home with friends and family members nearby.

What Is Threadlocker?

Bolted joints are a widely used joining system in vehicle assembly, especially with mechanical elements and articulated bodywork components. Bolts can be threaded or studded, depending on the situation they’re needed for. A bolt joint has two major parts: one part is threaded like a screw that goes into the other hole where it gets secured by threading out again to tighten its grip even more. However if you want your bolts to last through time then there needs some help from washers and/or threadlockers too!

The best threadlockers are those that guarantee the durability and effectiveness of joints. But beyond this, there is an increasing demand for products that respect people’s health by not having any substances in their composition which can be harmful to one’s well-being. This is why some manufacturers market LOCTITE 271 and 272; these stand out from other models because they offer all the necessary properties but without compromising on protecting your own general health or environmental welfare

A threadlocker offers various benefits such as guaranteeing joint strength and being free of any ingredients detrimental to good heath (such as phthalates). It also protects against corrosion due mainly to water infiltration into threaded connections through a protective barrier it forms over exposed metal threads.

The products on the market today are usually classified according to an ideal force required for disassembly or their viscosity. Some of these items can be especially effective in preventing relaxation and loosening threads, which is why they’re often used during construction projects where a secure fit between pieces needs to last.

LOCTITE 271 and LOCTITE 272 liquid threadlockers are perfect for use in industrial applications where strength, durability, safety of the operator is paramount. When you need a fastener that is safe to both machine as well as your life or limb these two products should be at the top of your list. In addition they don’t contain any type of danger symbols or warnings making them even more attractive on an already impressive resume!

Liquid Loctite 271 and 272 can ensure strong joints with no harm done to operators due their lack poison warning labels indicating environmental friendliness; this product only becomes better when combined with its versatility: compatible with nearly all machining methods including drilling press machines there’s never been anything quite like it!

Loctite 271 vs 272: Comparison

The two Loctite 271 and 272 products are vastly different despite being part of the same series. The properties and performance differ in many ways including how they can be used, their shelf life, drying time needed before curing or application setting up period for dry applications.

Fastener Size

The most important feature of our comparison is the size and range of fasteners that threadlockers can be used for. Threadlocks are required to create a strong connection between screws, bolts or other different parts in machinery, car engines and more. The viscosity (thickness) and strength of these products depends on the diameter – thicker solutions will have stronger adhesion but cannot work with smaller diameters, while lower-strength solutions can work with larger screw sizes without risking damage like corrosion sealing due to incorrect chemical usage.

Loctite 271 has an optimal use at 3/8 inch up tp 1 inch threads; however it also offers compatibility from 3/4 inches up to 1 5⁄16ths inches so this product can handle.

Maximum Heat Stability

You might not think that the temperature of your environment would have a lot to do with something like glue, but it does. All threadlockers on the market, including Loctite 272 and 271, are designed for use in environments where temperatures don’t exceed 450 degrees Fahrenheit. The former is more thermally stable than the latter – at 300°F or less any kind will work just great.

Fixture Time

Loctite 271 is meant for fast bonding and curing times, so it only takes about 15 to 20 minutes before the glue becomes fully cured. Loctite 272’s longer cure time means that you can take your hands off of an object after just 50 or 60 minutes instead of waiting a full hour

Application Purpose

Loctite 271 and 272 are two different types of threadlockers. Loctite 271 is a versatile adhesive that can be used for the installation of shock absorber mounts, press fittings, and wheel bolts among other tasks. With its versatility it has been proven to hold up well in all applications with little-to-no chance of coming loose after being properly tightened down by hand or machine tools like wrenches or screw drivers (Loctite). However there have been some instances where people who may not know what they’re doing improperly use too much force when tightening their parts which could cause permanent damage to your part as well as the application tool you were using because now basically once this type of glue dries out on metal surfaces.

How To Remove Loctite

Loctite does what your future self needs you to do for it now. Loctite is a registered trademark of adhesives and threadlockers used by the modern world with no end in sight. They prevent joints from shaking and loosening during strenuous exercise or while under pressure, which can be great if not wearing gloves – when removing them requires all sorts of careful tools that will likely make undoing any job easy as pie (minus the crust).

  1. There are many ways to remove a nut, bolt or screw. For those who want to avoid the risk of fire hazards when using heat-based tools such as torches and blowtorches, wiping dirt off with a towel is suggested first before unscrewing it in any way possible.
  2. Keep a distance of about 5 cm between the heat gun and the Loctite bonded object.
  3. Many people think that you apply heat to the area and then move on. This is incorrect, as quickly applying it to different areas will cause uneven heating or burning of your surface which can ruin your project! For best results, start by locating a single section at a time – such as one side of an armrest for example – and use direct contact with both hands over this spot before moving onto another part.
  4. After loosening the screw and nut with a socket wrench or screwdriver, use an angle grinder to heat up the Loctite. This will cause it to break apart so that you can take off any components without having much effort at all.
Loctite 271 vs 272 Infographic

Final Thoughts – Loctite 271 vs 272

Loctite 271 and 272 are two of the strongest threadlockers available on the market today. Loctite 272 is a great product in terms of thermal stability as well as screw sizes that can be handled with it, thanks to its comparative analysis you will also know some key differences between them both (271 being more versatile when temperatures fluctuate).

Loctite 272 is more better Loctite 271 because Loctite 272 can be used with fasteners ranging from 3/4 inch to 1.5 inches in diameter, allowing it to be used with a wider range of fasteners than other high-strength threadlockers.

Leave a Comment

Written By

Photo of author

William Baldwin

This Is William Baldwin, The Founder & Managing Editor of this website. Me and my team share automotive tips, tricks, and news

Fact Checked And Mechanically Reviewed By


Talha Atta

Talha Atta, a Mechanical Engineer and experienced technical content writer and editor at Autoglobes.com with a passion for the automotive industry.